HEAVY
EQUIPMENT
RENTAL
14 Ton Excavator for Rent
(three available)
Komatsu; PC138USLC-11 Excavators
This excavator has similar digging and lifting power as most standard
competitive excavators and has an easy-to-use engine and hydraulic
control technology that improves operational efficiency and lowers fuel
consumption by up to 4%. It has a short swing radius which makes it ideal
for spaces where a conventional excavator will not fit. It is also
equipped with six working modes and each mode is designed to
match engine speed, pump flow, and system pressure to the application.
*prices available upon request
Haulage available for an extra fee.
Specs:
-
Net Horsepower: 97.2 HP @ 2050 rpm (72.5 kW @ 2050 rpm)
-
Operating Weight: 34,563-37,547 lb (15,682 – 17,032 kg)
-
Bucket Capacity: 0.34-1.00 yd3 (0.26-0.76 m3)
-
Large LCD Color Monitor Panel with a rear-view monitoring system
-
Equipped with two speed travel
-
A high drawbar pull for work in wet or muddy conditions
-
Front Implement Swing Radius: 6’6” (1980mm)
-
Tail Swing Radius: 5’1” (1545mm)
-
Excellent all-around visibility
Also Includes:
-
24” Triple Grouser Shoes
-
15’1” Mono Boom with aux Hydraulics
-
8’2” Arm Assembly with aux Hydraulics
-
Hydraulic Control Unit
-
8’6” Dozer Blade Assembly with Edge
-
36” GP Bucket with Teeth or 55” Smooth Bucket
Komatsu; PC138USLC-11 Excavators
This excavator has similar digging and lifting power as most standard
competitive excavators and has an easy-to-use engine and hydraulic
control technology that improves operational efficiency and lowers fuel
consumption by up to 4%. It has a short swing radius which makes it ideal
for spaces where a conventional excavator will not fit. It is also
equipped with six working modes and each mode is designed to
match engine speed, pump flow, and system pressure to the application.
*prices available upon request
Haulage available for an extra fee.
Specs:
-
Net Horsepower: 97.2 HP @ 2050 rpm (72.5 kW @ 2050 rpm)
-
Operating Weight: 34,563-37,547 lb (15,682 – 17,032 kg)
-
Bucket Capacity: 0.34-1.00 yd3 (0.26-0.76 m3)
-
Large LCD Color Monitor Panel with a rear-view monitoring system
-
Equipped with two speed travel
-
A high drawbar pull for work in wet or muddy conditions
-
Front Implement Swing Radius: 6’6” (1980mm)
-
Tail Swing Radius: 5’1” (1545mm)
-
Excellent all-around visibility
Also Includes:
-
24” Triple Grouser Shoes
-
15’1” Mono Boom with aux Hydraulics
-
8’2” Arm Assembly with aux Hydraulics
-
Hydraulic Control Unit
-
8’6” Dozer Blade Assembly with Edge
-
36” GP Bucket with Teeth or 55” Smooth Bucket
450 John Deere Dozer
Engine: EPA Final Tier 4 (FT4)/EU Stage IV diesel (PowerTech PWS 4045)
Cab: Cab-forward design allows a full view behind, below and beyond
the blade; as well as side and rear visibility is open to the surrounding
job site. Keyless start, turbocharger cool-down, auto shutdown and Eco
Mode (will automatically adjust engine rpm and powertrain settings
based on load, without loss of performance). Total Machine Control
allows you to customize control of decelerator mode and response,
forward/reverse ground speed, steering modulation, and forward/reverse
speed ratios.
Haulage available for an extra fee.
Specs:
-
Infinity Variable Range to 9.7km/h (6.0 mph) – this allows total
flexibility to match ground speed to the load.
-
Engine Output – Net, kW (hp): 60 (80)
-
Rated Speed, rpm: 2200
-
Height – Max, mm (ft/in): 2799 (9ft 2in)
-
Ground Clearance, mm (in): 329 (13)
-
Blade Type – Power-Angle-Tilt
-
Displacement – 4.5L (276 cu.in.)
-
Net Peak Torque – 354Nm (261ft. –lb.) at 1,400 rpm
-
Travel Speeds – forward and reverse (8.0km/h (5.0mph))
-
Operating Weight – 7959kg (17,512 lb.)
*please note it does NOT have a ripper
*prices available upon request
Engine: EPA Final Tier 4 (FT4)/EU Stage IV diesel (PowerTech PWS 4045)
Cab: Cab-forward design allows a full view behind, below and beyond
the blade; as well as side and rear visibility is open to the surrounding
job site. Keyless start, turbocharger cool-down, auto shutdown and Eco
Mode (will automatically adjust engine rpm and powertrain settings
based on load, without loss of performance). Total Machine Control
allows you to customize control of decelerator mode and response,
forward/reverse ground speed, steering modulation, and forward/reverse
speed ratios.
Haulage available for an extra fee.
Specs:
-
Infinity Variable Range to 9.7km/h (6.0 mph) – this allows total
flexibility to match ground speed to the load.
-
Engine Output – Net, kW (hp): 60 (80)
-
Rated Speed, rpm: 2200
-
Height – Max, mm (ft/in): 2799 (9ft 2in)
-
Ground Clearance, mm (in): 329 (13)
-
Blade Type – Power-Angle-Tilt
-
Displacement – 4.5L (276 cu.in.)
-
Net Peak Torque – 354Nm (261ft. –lb.) at 1,400 rpm
-
Travel Speeds – forward and reverse (8.0km/h (5.0mph))
-
Operating Weight – 7959kg (17,512 lb.)
*please note it does NOT have a ripper
*prices available upon request
CC Underground has your solution for any underground utility installation challenge. We combine our team of dedicated and success driven staff with our extensive fleet of equipment to deliver results that are second to none.
Utilizing our directional drilling, cable ploughing, excavation, hydro vac units, project planning, cable pulling, and pipe fusion crews we proudly serve our clients in all utility industries from water/sewer, power, telecommunication, fuel, and energy. Whether our clients require our forces to work in conjunction with their team or if they prefer us to take a full turnkey approach to the project at hand we come prepared to tackle the industries most challenging tasks.